Autopot

Barbed 16mm straight connectors for joining runs of 16mm pipe

Barbed 16mm T connectors for creating multiple runs of 16mm pipe

The 16mm Click Fit Adapter and Filter is designed to be used with all sizes of FlexiTank and FlexiTank Pro. It is simply pushed onto the tap provid...

16mm flexi tubing is a far superior option to standard 16mm pipe. Tighter angles can be laid without kinking the pipe and the pipe has no tention l...

16mm flexi tubing is a far superior option to standard 16mm pipe. Tighter angles can be laid without kinking the pipe and the pipe has no tention l...

16mm flow value/inline tap. Can be used at the end of the line to give you the abilty to drain a sytem or can be used in pumped systems to even out...

Used to prevent blockages in autopots and drippers, a filter is a must on any irrigation system.

16mm stop ends, used at the end of the runs of piping. Alternatively a 16mm flow valve can be used.

When constructing larger AutoPot systems it is advised to run 16mm pipe from the nutrient tank, then split off from that using 6mm pipe to the valves.

When constructing larger AutoPot systems it is advised to run 16mm pipe from the nutrient tank, then split off from that using 6mm pipe to the valv...

When constructing larger AutoPot systems it is advised to run 16mm pipe from the nutrient tank, then split off from that using 9mm pipe to the valves.

When constructing larger AutoPot systems it is advised to run 16mm pipe from the nutrient tank, then split off from that using 9mm pipe to the valv...

16mm top hat grommet, for creating a seal in a container for which a 16mm pipe can pass through the centre of the grommet.

The 47 Litre Tank Stand is ideal for raising a 47 Litre Tank to maintain gravity pressure. The stand dimensions are as follows: 40cm (15.75″) L x 3...

6mm cross connectors for joining multiple AutoPots

6mm black flexible delivery tubing for use with AutoPots and dripper systems Per Metre

6mm black flexible delivery tubing for use with AutoPots and dripper systems  50m Roll

6mm tap for isolating the nutrient tank on 6mm pipe

6mm stop ends. Needed if you are reconfiguring an existing setup

straight connectors for 6mm tubing

6mm T connector for joining your AutoPots to your nutrient tank

 6mm filter to go inside your nutrient tank

9mm cross connectors for joining multiple AutoPots

9mm black flexible delivery tubing for use with AutoPots and dripper systems Per Metre

9mm flexible delivery tubing for use with AutoPots and dripper systems  30m Roll

9mm tap for isolating the nutrient tank on 9mm pipe

9mm stop ends. Needed if you are re-configuring an existing setup

9mm T connector for joining your AutoPots to your nutrient tank

 9mm filter to go inside your nutrient tank

Replacement 15 litre pot for the 1Pot AutoPot system

The AutoPot Extension Kit is a single unit comprising of one 15L pot and one tray with an AQUAvalve5 fitted inside. AutoPot Extension kits can easi...

A replacement 1Pot Tray and Lid as supplied with AutoPot 1Pot modules and systems. The 1Pot Tray and Lid accepts an 8.5ltr or 15ltr Square Pot

A replacement 1Pot XL Tray and Lid as supplied with AutoPot XL modules and systems.

Replacement 25 litre pot for the 1Pot AutoPot system

Autopot AirBase Round Give your plants a lift with AirBase. This handy plate fits into the bottom of your pot during set up and allows you to sides...

The AirDome has been designed to increase the amount of air around the root zone in the pot. If you are lucky enough to have power in your greenho...

The AQUAvalve is supplied with all the AutoPot systems. Once connected to the water supply the AQUAvalve will control the flow of water to the plan...

The AQUAvalve 5 is supplied with all the AutoPot systems. Once connected to the water supply the AQUAvalve 5 will control the flow of water to the ...

The AQUAvalve cover if used in conjunction with the AQUAvalve allows the grower to create their own basic but very effective hobby system if used c...

Auto3 XL allows you to irrigate three 25 litre solid XL or Flexi pots in single tray and lid assembly that measures just 114.5cm x 38.5cm. All fed ...

Grow what you want, when you want, whilst still enjoying the incredible space and maintenance saving benefits of a tray system. Auto8 15ltr comes c...

Auto 9 XL allows you to irrigate nine 25L solid or 20L Flexipots in single tray and lid assembly measuring just over a square metre. All fed by a s...

The Root Control Discs or RCDs are designed to fit the 1Pot system, the Easy2Grow Kit & the 2Pot extension trays to extend the easy2grow Kit. T...

Replacement 20 litre FlexiPot for the AutoPot system The AutoPot FlexiPot 20 L fits an AutoPot XL tray and allows you to combine our power-free, wa...

The AutoPot Extension Kit is a single unit comprising of one 20 L FlexiPoy and one tray with an AQUAvalve5 fitted inside. AutoPot Extension kits ca...